GuidesSwitch Tuning

How to open and brush lube switches

Open one mechanical switch, brush lubricant onto its housing rails and stem, then close it again using the sequence shown by the creator.

Overview

This guide shows how to open one mechanical switch, apply lubricant to the inside rails of the bottom housing and the sides and legs of the stem, and close the switch again. The sequence follows one creator demonstration. It does not show a board installation, typing test or sound test, so none of those outcomes are claimed here.

The procedure is limited to the actions visible in the source clip. No lubricant brand or grade is confirmed, and the switch model is not identified. The clip does not show the spring being lubricated, nor does it show whether factory lubricant is present on other switches.

Before starting, check the lubricant container against the information supplied by its maker or seller. The visible marking is Unverified, as are the lubricant grade and quantity. Work on one switch at a time and keep the small spring under control while the switch is open.

Materials & tools

Item

Role in the shown mod

Specification / compatibility

Evidence / verification status

Switch opener

Holds the switch while the top housing is pressed down and removed

Tool type and fit are Unverified

Visible in the demonstration

Fine paintbrush

Applies lubricant to the housing rails and stem sides and legs

Brush size is Not shown / verify before use

Visible in the demonstration

Small tub of white switch lubricant

Holds the lubricant applied with the paintbrush

The tub is marked “4ML / 205”; quantity and grade are Unverified; brand and grade code are Unverified

Visible; the marking is the creator’s label

Switch housing

The upper and lower plastic parts that form the switch body

Switch model and compatibility are Unverified

Visible

Stem

Receives lubricant on its sides and legs, then closes over the spring

Switch model is Unverified

Visible

Spring

Sits inside the switch and supports the stem

Material and size are Not shown / verify before use

Visible; it is placed, but not lubricated

Step-by-Step

  1. Set the switch on the switch opener, press it down and pull the top housing off. Shown at 00:13.
    Fingers press a purple mechanical switch down into a black switch opener on a blue desk mat.
    Video: @alexotos on TikTok
  2. Brush lubricant onto the inside rails of the bottom housing with the paintbrush. Shown at 00:32.
  3. Place the spring. Shown at 00:41. Spring is picked up and placed in the bottom housing. The video does not show spring lubrication.
  4. Brush lubricant onto the sides and legs of the stem. Shown at 00:47.
    A fine paintbrush touches a red-pink switch stem held in a metal pronged holder; the purple bottom housing stands in front.
    Video: @alexotos on TikTok
  5. Place the stem over the spring with its legs facing the metal leaf. Shown at 00:55.
  6. Press the top housing down over the stem until it snaps closed. Shown at 00:57.

Common Pitfalls

Creator-stated cautions

- A spring sits inside the switch. Handle the exposed spring carefully and keep track of it while working. This caution was stated without a timestamp. - The pointy stem legs face the metal leaf. Check their orientation before closing the switch. This caution was stated without a timestamp.

Questions to settle yourself

- Confirm that the lubricant is appropriate for your switch before applying it. The visible container marking does not confirm a brand, grade or quantity, and no external source was supplied to verify those details. - Confirm that the opener fits your switch. The clip does not identify the switch model or show opener dimensions, so compatibility cannot be assumed. - The clip does not show whether the switch already has factory lubricant, and it does not demonstrate what to do if lubricant is already present. Check the specific switch and lubricant documentation rather than assuming this sequence applies unchanged. - No result was measured or tested separately. The clip offers no evidence about installation, typing feel or sound after the switch is closed.

Sources

Video source

Original video — Scope: observed actions and visible labels; creator statements remain attributed, not independently verified.

External sources

Glorious — Context only: “Reassemble the switches by lining up the parts and snapping them together.”

Kinetic Labs — Context only: “Apply the lube to the rails of the bottom housing.”

Unverified

Specifications and claims not explicitly supported by the video or the cited passages remain unverified; this guide is not an independent hands-on test.